Main Sewer Line Repair in Marietta means finding the break, root mass, or collapsed section in the pipe that runs from your house to the city main and fixing it for good. We handle residential main sewer line repair Marietta GA homeowners call about most: backups at the cleanout, gurgling toilets, and wet spots in the yard. We've served Marietta since 2012.
Main Sewer Line Repair in Marietta is the diagnosis and correction of a failure in the private sewer lateral, the pipe that carries wastewater from your home to the municipal main under the street. That pipe is yours, not the city's, and it runs under your yard, driveway, or foundation slab. When it cracks, sags, or fills with roots, waste has nowhere to go. We locate the exact failure point with a sewer camera, then repair or replace only the damaged run, using PVC sewer pipe, HDPE pipe, or a cured-in-place pipe liner depending on depth, access, and pipe material.
Marietta's housing stock makes this a common call. Homes near Marietta Square and the Whitlock Avenue Historic District often still have clay tile sewer pipe or Orangeburg pipe from the mid-20th century, and both fail predictably. Clay pipe joint separation lets roots in at every joint, and Orangeburg pipe deterioration turns the pipe into a soft, oval mess. Add North Georgia's clay soil, which shifts with every wet winter and dry summer, and you get sagging or bellied pipe. If your main sewer is backing up after cleaning Marietta GA, the line was never actually fixed, only poked open.
Every main line repair we do in Marietta starts with a camera and ends with a tested, documented line. Here is what is covered on a standard repair, so you know what you are paying for before we start digging.
We run a RIDGID sewer camera the full length of your main line, record the footage, and show you the monitor. You see the pipe material, the defect, and the depth. You keep a copy of the video, which matters for insurance and resale.
A sewer line locator transmitter on the camera head lets us mark the failure on the surface before we dig. That is how we keep the excavation to a small, targeted area instead of trenching your entire yard or driveway.
We cut out the damaged section, install new PVC sewer pipe or HDPE pipe, and couple it to the existing line with proper pipe couplings. Bedding and grade are set so waste flows downhill, not into a low spot.
If the line can be rehabilitated from the inside, we use a cured-in-place pipe liner or pipe bursting instead of open excavation. Less yard damage, faster completion, and a smooth new wall that resists tree root intrusion.
Before backfill, we pressure-test the repair with pipe test plugs and run the camera again to confirm flow and grade. You get photos of the finished line and a workmanship warranty on the repair.
We backfill and compact in lifts, then restore the surface as close to original as the site allows. Sod, gravel, or concrete patch depends on what we opened. We tell you what to expect before we start, not after.
You call and describe what you are seeing: multiple slow drains, a backup at the cleanout, gurgling, or sewage in the yard. We ask about the age of the house and whether you have a basement or slab. That tells us whether to expect clay tile sewer pipe, cast iron sewer pipe, or PVC, and we schedule a visit, usually same-day for active backups.
We pull the cleanout cover and run a RIDGID sewer camera down the line. The footage shows the pipe material, the depth, and the exact failure: tree root intrusion, a crack, a belly, or a full collapse. You watch the monitor with us. This step takes 30 to 45 minutes and decides everything that follows.
Using a sewer line locator transmitter on the camera head, we mark the failure point on the surface with paint and flags. That tells us whether we are digging in a flower bed, through a driveway, or under a mature oak. Accurate locating is what keeps the excavation small instead of trenching the whole yard.
For a localized break, we excavate and install new PVC sewer pipe with pipe couplings on both sides. For a long run of failing clay or Orangeburg pipe, we pull a CIPP liner through the existing pipe or use pipe bursting to replace it with HDPE pipe. Most spot repairs take one day; full replacements run two to three.
Before anything goes back in the ground, we pressure-test the new section and run the camera again to confirm flow and grade. Then we backfill, compact in lifts, and restore the surface. You get photos of the finished line and a workmanship warranty on the repair.
You call and describe what you are seeing: multiple slow drains, a backup at the cleanout, gurgling, or sewage in the yard. We ask about the age of the house and whether you have a basement or slab. That tells us whether to expect clay tile sewer pipe, cast iron sewer pipe, or PVC, and we schedule a visit, usually same-day for active backups.
Records the inside of your main line so we can see pipe material, depth, and the exact defect. You watch the monitor with us before we quote anything.
Cut roots and clear blockages in lines where a full hydro jetter cannot reach. We use root cutter heads sized to the pipe diameter so we do not scar the walls.
High-pressure water scours grease, sludge, and soft debris off the pipe walls. The vacuum truck removes the spoil so nothing backs up into your home.
Mounted on the camera head to mark the exact path and depth of the line on the surface. This is what keeps our excavation small and targeted.
Inverts and cures a cured-in-place pipe liner through your existing pipe. Used for trenchless rehabilitation of failing clay, cast iron, and Orangeburg runs.
Pipe bursting and open excavation equipment for replacing collapsed or badly sagging lines with new HDPE pipe or PVC sewer pipe.
A 1953 home had backed up three times in 18 months. Each previous visit was a cable job with no camera. The line was clay tile sewer pipe with roots entering at four joints and a partial collapse near the sidewalk.
After: We lined the full run with a cured-in-place pipe liner in one day. Flow test passed, camera pass showed a smooth wall, and the homeowner has had no backups since. The yard was untouched.
Book this service →
Sewage backed into a basement on a Sunday morning. The main line was cast iron sewer pipe that had corroded through and collapsed under a concrete driveway. The homeowner had no accessible cleanout.
After: We stopped the flow the same day, excavated the failed section, replaced it with PVC sewer pipe, and installed a new cleanout at the property line. Concrete was patched and the line pressure-tested before backfill.
Book this service →
A 1968 ranch had recurring slow drains and a soft, spongy spot in the yard. Camera footage showed Orangeburg pipe deterioration along a 40-foot run, with the pipe deforming into an oval and losing grade.
After: We replaced the full run with HDPE pipe using pipe bursting, which avoided trenching the mature landscaping. The new line was graded, tested, and cameraed. Drains flow at full speed.
Book this service →Most main line calls fall into a handful of failure modes. Here is what we see most in Marietta and how we fix each one.
Ask a pro →We cut the roots with a root cutter head, camera the pipe to see whether it held, and then repair or line the damaged section. A CIPP liner gives you a root-proof wall, so you stop paying for repeat cabling.
We camera the line to find what the cable missed: a belly, an offset pipe joint, or a collapsed section. Then we fix the pipe, not just the clog, and pressure-test the repair before backfill.
We locate the low spot with the camera and re-grade or replace that section. In many Marietta yards the cause is shifting clay soil, so we bed the new pipe properly to keep it from sagging again.
We excavate or use pipe bursting to remove the failed section and install new PVC or HDPE pipe. Most collapsed-line replacements on a Marietta main are finished in two to three days, including surface restoration.
$1,800 - $12,000 depending on scope, with most spot repairs at $2,500 - $4,500
Typical 2026 pricing in this area runs $1,800 to $12,000 for main sewer line repair, with most spot repairs landing between $2,500 and $4,500. The wide range is real, and it comes down to depth, pipe material, length of the failed run, and whether we can go trenchless. A root cut and localized repair on a shallow PVC line is a very different job from replacing 60 feet of collapsed clay pipe under a driveway. We camera the line first, show you the footage, and give you a firm price before we dig. No mystery line items, no change orders mid-job.
You are paying for a diagnosis, not a guess. The camera inspection, the locating, the correct repair method, and the pressure test are what keep you from paying for the same backup twice. A repair that holds is cheaper than three cable jobs that do not.
A line three feet down is a straightforward dig. A line eight feet down under a driveway requires shoring, more labor, and more time. Depth is usually the single biggest driver of cost on a Marietta main line repair.
Get a quote ↗PVC sewer pipe is the easiest to repair. Clay tile sewer pipe, cast iron sewer pipe, and Orangeburg pipe add cost because they often fail along a longer run and need full replacement rather than a spot fix.
Get a quote ↗A two-foot crack is a spot repair. A 50-foot run of separated clay joints is a replacement or a full liner. The longer the damaged run, the more material, labor, and camera verification the job requires.
Get a quote ↗CIPP lining and pipe bursting cost more per foot in materials but save on excavation, surface restoration, and landscaping. On a line under a finished driveway or mature trees, trenchless is often the cheaper total.
Get a quote ↗Most main sewer line repairs in Marietta run $1,800 to $12,000, with typical spot repairs landing near $2,500 to $4,500. A simple root cut and localized repair sits at the low end. Full replacement of a long clay or Orangeburg run, especially under a driveway, pushes toward the top. Camera inspection, depth, pipe material, and surface restoration drive the number. We give you the price before we dig.
Multiple fixtures backing up at once is the clearest sign, especially a basement floor drain or tub that fills when you run the washing machine. Gurgling toilets, slow drains throughout the house, and sewage odor in the yard point the same direction. If one drain is slow, it is usually a branch line. If everything is slow, the main is blocked and needs a camera inspection.
Yes, and it is the single most common cause we find. Roots enter at joints and cracks, especially in clay tile sewer pipe, and grow into a mat that catches paper and grease. Maples, oaks, and pines across Marietta send roots toward the moisture and nutrients in a sewer line. We cut them with a root cutter head, then repair or line the pipe so they cannot return.
A licensed Georgia plumbing contractor with sewer-specific equipment. That means a camera, a hydro jetter, and excavation or trenchless capability, not just a drain snake. Marietta Sewer Solutions has handled main line work here since 2012, holds Georgia Master Plumber License credentials, and carries NASSCO PACP certification for inspections. Call +14707391979 and we will tell you what your line needs.
Sewage backing up does not improve overnight. Call Marietta Sewer Solutions at +14707391979 and we will camera your line, show you the problem, and give you a straight price for the fix. Licensed, insured, and working Marietta main lines since 2012.
Call Now +14707391979 →Reach out for fast, friendly service. We're available 24/7 for emergencies and can schedule regular appointments Monday through Friday. Call us at +1 470-739-1979 or email [email protected]. We serve all of Marietta and surrounding areas.