Full Camera Inspection
We record the entire run from the cleanout to the city tap and measure the fall. You see the low spot on the monitor before we quote anything. The footage is yours to keep.
We re-level bellied pipe and restore full flow to your main line.
Sagging Sewer Line Repair in Marietta That Ends Repeat Backups
Sagging Sewer Line Repair in Marietta fixes the low spots in your main that trap waste and cause repeat clogs. If your drains gurgle, your cleanout overflows, or a plumber has already snaked the same line twice this year, the pipe has likely bellied. We locate the dip with a sewer camera, then re-level or line the pipe so water and waste leave your home the way they should. Licensed, insured, and working across Georgia since 2012.
Careful work. Honest options.
About this service
What Sagging Sewer Line Repair in Marietta Actually Fixes
A sagging sewer line, also called a bellied line, is a section of pipe that has lost its downward slope and now holds a pool of water and waste. Every flush adds to that pool until the pipe fills and backs up into your lowest drain. We find the exact low point with a push rod camera, measure the fall, and then correct it. Depending on pipe material and depth, that means re-leveling the run, installing a CIPP liner to bridge the dip, or replacing the sunken section with new PVC sewer pipe.
Marietta has plenty of conditions that cause this. Older neighborhoods around Marietta Square and Whitlock Avenue Historic District still run clay tile sewer pipe and Orangeburg pipe, and both materials shift as soil settles after heavy spring rain. Tree root intrusion at the joints makes it worse, because roots hold moisture and soil moves around them. Homeowners call us most often after the second or third backup in a season, when a drain snake auger clears the clog but the water still pools in the same spot. If you have been searching for bellied sewer line near me Marietta GA, this is the repair you need.
- ✓ Backups Stop Coming Back
- ✓ No Yard-Wide Trenching
- ✓ Lower Cost Than Replacement
- ✓ Protects Your Home's Value
What's included
What Our Sagging Sewer Line Repair Includes
Every repair starts with a camera inspection and ends with a tested line and recorded proof. The exact scope depends on what the camera finds, but here is what is standard on a Marietta Sewer Solutions sagging sewer line repair.
Written Fixed-Price Scope
You get a written scope naming the repair method, the pipe material, and the restoration. The price is fixed before we open any ground. No hourly billing, no surprise add-ons.
Pipe Locating and Utility Markout
We mark the pipe path with a sewer line locator transmitter and call in the Georgia 811 locate so we do not hit gas, water, or irrigation lines. That keeps the excavation as small as possible.
Slope Correction or Lining
We re-level the run, install a cured-in-place pipe liner, or replace the failed section, whichever the pipe needs. Methods are matched to clay tile, cast iron, Orangeburg, ABS, or PVC.
Pressure Test and After Video
We test the repaired line with pipe test plugs and run the camera again. You get the after footage and a written 5-year workmanship warranty on the repair before we leave the site.
Surface Restoration
We backfill, compact in lifts, and restore sod, gravel, or concrete as needed. Most Marietta yards are back to normal the same day, and we haul away all debris.
How it works
How Our Sagging Sewer Line Repair Process Works
We run a push rod camera or sewer camera from the cleanout to the city tap and record the whole run. You watch the screen with us. We mark the low spot, measure the depth, and note any offset pipe joints, root intrusion, or cracked sections. This takes 45 to 60 minutes and costs nothing when you book the repair with us.
Before anyone digs, you get a written scope with a fixed price. It names the repair method, the pipe material we will use, and the restoration we will do. If the camera shows the line is too far gone for spot repair, we tell you that and quote replacement instead. You decide, and nothing starts until you say go.
We use a sewer line locator transmitter to mark the exact path and depth of the pipe, then call in the Georgia 811 utility locate. Access is usually through an existing cleanout. If we need to open ground, we cut a small, clean excavation and set aside the sod so it can go back.
For a short dip in sound pipe, we re-level the run and reset the fall. For a longer sag or a pipe we cannot expose, we install a cured-in-place pipe liner that bridges the low spot and restores a smooth bore. Clay tile sewer pipe and cast iron sewer pipe each get the method that fits the material. Most jobs finish in one day.
We pressure-test the line with pipe test plugs, then run the camera again and record the finished work. You get the before-and-after footage and a written warranty. We backfill, compact, and restore the surface. Before we leave, we walk the line with you and confirm every fixture drains hard and fast.
STEP 01Camera Inspection
We run a push rod camera or sewer camera from the cleanout to the city tap and record the whole run. You watch the screen with us. We mark the low spot, measure the depth, and note any offset pipe joints, root intrusion, or cracked sections. This takes 45 to 60 minutes and costs nothing when you book the repair with us.
Tools & methods
Tools and Methods We Use for Sagging Sewer Line Repair
Sewer Camera and Push Rod Camera
We record the full run and measure the fall so we can pinpoint the low spot and show you the problem on screen before we quote.
Sewer Line Locator Transmitter
Marks the exact path and depth of the pipe on the surface, so the excavation stays small and we avoid hitting other utilities.
Hydro Jetter
Scours grease buildup and roots from the pipe walls with high-pressure water so the camera can read the true condition of the line.
Pipe Bursting Machine
Pulls new HDPE pipe through the old line while breaking it outward, giving you a brand-new pipe with minimal surface disruption.
CIPP Liner Inversion Drum
Installs a cured-in-place pipe liner through existing access points to bridge a moderate sag without digging up the yard.
Drain Snake Auger and Cleanout Auger
Clears blockages from the cleanout and branch lines so we can get the camera into the main for a clean inspection.
Real results
Before and after.
Sagging Sewer Line Repair
Clay Tile Line Re-Leveled in Marietta Square
A 1948 home near Marietta Square had backed up three times in two years. The camera showed a 12-foot section of clay tile sewer pipe with a 3-inch belly and roots at two separated joints. The homeowner was quoted a full replacement with a yard-wide trench.
After: We installed a cured-in-place pipe liner through the existing line in one day. The after video showed a smooth bore with correct fall and no root intrusion. The homeowner kept the historic landscaping and has had no backups in the two years since.
Book this service →
Sagging Sewer Line Repair
Spot Repair Under a West Marietta Driveway
A West Marietta homeowner had the same line snaked three times in 18 months. The sag sat under a concrete driveway, and two other companies quoted a full dig that would have torn out the driveway and part of the front walk.
After: We used pipe bursting to pull new HDPE pipe through the old line in a single pass. The driveway stayed intact. The new pipe has no joints in the repaired section, so roots have nothing to grab. Flow tested at full capacity the same day.
Book this service →
Sagging Sewer Line Repair
Restaurant Main Repaired on Franklin Road
A Franklin Road restaurant had a main that backed up during the lunch rush two or three times a month. Grease buildup and a sagging section combined to choke the line. Each backup forced a partial shutdown and a costly emergency cleaning.
After: We hydro jetted the line, repaired the sagging section, and installed a backwater valve. We also set up preventive jetting every six months. The restaurant has gone 14 months without a lunch-rush backup.
Book this service → Problems we solve
Sagging Sewer Line Causes and Fixes in Marietta GA
A bellied line shows up in a few predictable ways. If any of these sound familiar, the slope is the problem, not the clog. Here is what we see most often and how we fix it.
Ask a pro →Same drain backs up every two or three months
We camera the line, find the exact dip, and correct the slope. Once the pipe drains properly, the repeat backups stop. Most customers see the difference on the first heavy-use day.
Multiple drains gurgle when you run the washer
We inspect the main and check for a sag, offset pipe joints, or root intrusion. If the line is bellied, we re-level or line it. If roots are the issue, we cut them and repair the joint.
Sewage smell in the yard or near the cleanout
We locate the low spot, expose or line the section, and seal the failing joint with joint sealant or a new coupling. The smell goes away once the pipe drains and the joint is tight.
Slow drains throughout the whole house
We jet the line with a hydro jetter to clear grease buildup, then camera it. If we find a sag, we quote the repair. If the pipe is sound, a thorough cleaning may be all you need.
Transparent pricing
Sagging Sewer Line Repair Cost in Marietta Georgia
$2,500 - $12,000 depending on scope
Typical 2026 pricing in this area runs $2,500 to $6,500 for a spot repair and $6,000 to $12,000 for trenchless lining, depending on length, depth, and access. A camera inspection is included when you book the repair with us. We give you a fixed written price before any excavation, so the number you approve is the number you pay. If the camera shows the line needs replacement instead, we tell you and quote that separately.
A fixed price before we dig means no hourly surprises. Most customers find that a targeted repair costs far less than full replacement, and the 5-year workmanship warranty means the fix is backed in writing.
•affects cost
A main buried 3 feet down is a much smaller job than one at 8 feet. Deeper lines need shoring, more excavation time, and more backfill, which raises the cost. Depth is usually the single biggest driver.
Get a quote ↗•affects cost
A short dip can be re-leveled with a spot repair. A long, gradual belly often needs a full liner or a longer replacement section. Every extra foot of pipe adds material and labor.
Get a quote ↗•affects cost
Clay tile sewer pipe and cast iron sewer pipe each need different repair methods. Orangeburg pipe cannot be reliably lined and usually has to be replaced, which changes the scope and the price.
Get a quote ↗•affects cost
A repair under a lawn is straightforward. One under a concrete driveway, patio, or mature tree costs more because of cutting, restoration, and careful excavation. Trenchless methods can reduce this cost significantly.
Get a quote ↗ Proof you can check
Licensed, Certified, and Reviewed
- Georgia Plumbing Contractor License · Georgia State Construction Industry Licensing Board
- Georgia Master Plumber License · Georgia State Construction Industry Licensing Board
- NASSCO PACP Certification · NASSCO
- NASSCO CIPP Certification · NASSCO
- OSHA 30 Safety Training · Occupational Safety and Health Administration
Most spot repairs run $2,500 to $6,500 in 2026, and trenchless lining runs $6,000 to $12,000 depending on length and depth. The biggest cost drivers are how deep the pipe sits, how much ground we have to open, and whether we line or replace the section. We give you a fixed written price after the camera inspection, so you know the number before we start.
Soil settling is the main cause. When backfill around a pipe compacts unevenly, the pipe loses its slope and holds water. In older Marietta neighborhoods, clay tile sewer pipe and Orangeburg pipe make it worse because their joints separate as the ground moves. Tree root intrusion, heavy rain, and decades of traffic over a shallow line all speed up the process.
Yes, in many cases. If the pipe around the dip is still sound, we re-level the run or install a cured-in-place pipe liner that bridges the low spot and restores a smooth bore. You keep the existing pipe and avoid a full dig. If the camera shows collapsed sewer line damage or widespread cracking, replacement is the honest answer and we will tell you so.
It is the most common cause we find. A bellied pipe holds water and debris at the low point, so the same clog returns every 60 to 90 days no matter how many times it is snaked. If you have had the same line cleared twice this year, ask for a camera inspection. Fixing the slope is what stops the cycle.
Ready when you are
Get Your Sagging Sewer Line Repair in Marietta Scheduled
Stop snaking the same line every few months. Call Marietta Sewer Solutions and we will camera the main, show you the low spot, and give you a fixed price for the repair. Same-day estimates, 24/7 emergency response, and a 5-year workmanship warranty on the fix.
Book a Camera Inspection +14707391979 →
Request an appointment
Contact Marietta Sewer Solutions
Reach out for fast, friendly service. We're available 24/7 for emergencies and can schedule regular appointments Monday through Friday. Call us at +1 470-739-1979 or email [email protected]. We serve all of Marietta and surrounding areas.